Training Basic Drilling Engineering & Environmental Safe Drilling Practice-Oil and Gas Mining

Published May 22, 2020 | By jptraining

deskripsi

The training will provide to facilitate the trainer to share his knowledge and experiences in basic concept of drilling and exploration. Facilitator will assist participants to know basic theoretical of oil, gas and geothermal drilling.

Materi:

MN030.1.1 – Steps to drilling a well
MN030.1.2 – Types of rigs
MN030.1.3 – Rig Components
MN030.1.4 – Rig Systems
MN031.2.1 – Equations and Inflow Performance Relation ship Functions of Drilling/Completion
MN031.2.2 – Fluids
MN031.2.3 – Fluid Types
MN031.2.4 – Fluid Models
MN031.2.5 – Introduction to Rotary Viscometer
MN031.2.6 – Other Testing Equipment
MN031.2.7 – Objectives of Monitoring Fluids
MN031.3.1 – General Equations and Concepts Diagnostic tests
MN031.3.2 – Water based muds
MN031.3.3 – Oil based muds
MN031.3.4 – Additives
MN031.3.5 – Mud handling system
MN031.4.1 – Tubing DesignFunctions of cement
MN031.4.2 – Cement Types
MN031.4.3 – Cement Additives
MN031.5.1 – Drill string
MN031.5.2 – Casing and tubing
MN031.5.3 – Casing classification
MN031.5.4 – Stresses on casing
MN031.5.5 – Casing setting depth
MN031.5.6 – Burst and collapse calculations
MN031.5.7 – Wellheads
MN031.6.1 – Hydrostatics
MN031.6.2 – Buoyancy
MN031.6.3 – Flow through pipes and annuli
MN031.6.4 – Flow path
MN031.6.5 – Pressure loss calculations
MN031.7.1 – Hydrostatics Bit Types
MN031.7.2 – Bit Parts
MN031.7.3 – Bit Classification
MN031.7.4 – Bit Nozzles
MN031.8.1 – Hydrostatics Definitions
MN031.8.2 – Causes of kicks
MN031.8.3 – Kick indicators
MN031.8.4 – Shut-in procedure
MN031.8.5 – Well Kill Procedures
MN031.9.1 – Reasons for directional wells
MN031.9.2 – Planning Trajectory
MN031.9.3 – Kickoff Methods
MN031.9.4 – Survey Methods
MN031.9.5 – Survey Calculations
MN031.9.6 – Hole Assemblies