Get Adobe Flash player

Categori

Training running 2018

1. Power outages 2. Types of power outages (Brown out) 3. Protecting networks from outages 4. Solar flares 5. Blackout inevitability and electric sustainability 6. Transmission failure protection 7. M

Offering Training

Industrial Power Systems Analysis Engineering

DESCRIPTION

 Desain sistem distribusi tenaga listrik sangat penting untuk keselamatan, pemeliharaan, troubleshooting dan operasi yang efisien dari pabrik industri modern. Sistem distribusi listrik termasuk : tegangan tinggi dari utilitas pemutus sirkuit, transformator utama, menengah tegangan switchgear, trafo distribusi, pusat kontrol motor, motor listrik, kecepatan drive variabel, dll .Kursus ini dirancang untuk menangani semua aspek dari sistem distribusi listrik industri, termasuk sistem perencanaan, pemilihan peralatan, spesifikasi dan aplikasi, sistem grounding, perlindungan dan sesuai dengan persyaratan kode listrik, dll.

WHO SHOULD ATTEND

Electrical power distribution engineers, electrical power system engineers, plant managers and consulting engineers, as well as technical personnel involved in the design, engineering, operation and maintenance of power distribution systems in an industrial plant.

OBJECTIVE

Mempelajari desain utama sistem listrik industri, perencanaan dan analisis. Kursus ini dirancang untuk insinyur listrik untuk review, memperkuat dan menyegarkan pengetahuan mereka tentang desain sistem kekuatan, operasi dan pemecahan masalah. Memajukan pengetahuan dan keterampilan dalam perencanaan sistem, pemilihan peralatan, spesifikasi dan aplikasi. Belajar dan memahami aspek-aspek penting dari distribusi daya dan langkah-langkah desain sistem. Meningkatkan pengetahuan Anda tentang bagaimana untuk mengoperasikan sistem tenaga industri Anda secara efisien dan aman.

Setelah mengikuti kursus ini peserta diharpakan dapat :

v  Mengidentifikasi dan memperbaiki masalah operasi sistem tenaga yang benar seperti di atas dan di bawah tegangan, faktor daya rendah, arus kesalahan tinggi dan distorsi harmonik.

v  Menggunakan peralatan listrik dan alat dengan efektif.

v  Mempelajari cara untuk menentukan dan memilih peralatan listrik yang memadai untuk aplikasi yang tepat.

v  Memahami dan melakukan perhitungan hubung singkat, sistem grounding dan koordinasi relay.

SUMMARY OUTLINE

1.      Introduction to industrial power systems

2.      System design considerations

3.      System planning

4.      Equipment selection

5.      Sort circuit calculation

6.      System grounding design

7.      Power flow analysis

8.      Protection and relay coordination

COURSE METHOD

COURSE SPEAKER

v  Presentation

v  Discuss

v  Case Study

v  Evaluation

v  Simulation

Teguh Santoso, Ir

 

Teguh Santoso experienced more than 27 years in electrical.

TIME & VENUE

COURSE FEE

Dafam fortuna Hotel

Jl. Dagen 60 Malioboro

Yogyakarta

(02746429888)

 

18-21 Juli 2016

17-20 October 2016

 

4 days

08 am – 04 pm

IDR 7,000,000.00 per participant non residential

Course fees can be transferred to the following account number :

CV JP CONSULTANT : MANDIRI Bank Yogyakarta Branch Acc. No.  1370007857077

 

FACILITY

INFORMATION AND REGISTRATION

¨  Module / Handout

¨  Certificate

¨  Souvenir

¨  Training Kit

JP Consultant

Kalibayem No. 436 Ngestiharjo Kasihan Bantul Yogyakarta

Email         :  jpconsultantyogyakarta@gmail.com

Website     : www.jptrainingcenter.com

Contact      : Tina (085741853818)      

                             (082225972336)

                     Fia   (081215667730)                  

 

 

 

Offering Training

Fault Analysis in Electrical Networks

DESCRIPTION

   The detection and identification of faults on an electrical network has been and still is one of the problems facing Transmission and Distribution companies. The characteristics and operation of a network system are major considerations in creating or reducing the effects of electrical faults on the system. Effective modern protective systems are designed to sense faults and send a warning signal or initiate disconnection of the faulty system in an appropriate time. Delegates are encouraged to participate by active involvement in group discussions and sharing experiences.

   The training is designed to present methods of electrical fault analysis. The causes of electrical faults and the detection and possible solutions in a network system.  The method of this seminar is to develop the delegates thinking process. Following the attendance at this training, participants will return to their respective departments with a wider knowledge of the concepts of electricity and the inherent danger that electricity can cause. On successful completion of this seminar, participants will have:

 

·         Understand the different types of faults and their effect

·         Consequences of sustained fault current and any electrical arcs

·         Knowledge of symmetrical and unsymmetrical faults

·         Earthing/grounding systems

·         Network protection systems

WHO SHOULD ATTEND

This training is intended for electrical staff who work with transmission and distribution systems for the public or private sector

SUMMARY OUTLINE

·          Introduction to Electrical Network Faults

1.      Pre seminar assessment

2.      Introduction, identification and discussion of the week’s goals

3.      Network faults and their types

4.      Fault characteristics to include introduction into short circuit issues

5.      Looking at limiting fault currents

6.      Arcing and bolted faults

7.      Identifying methods of fault analysis

·         The Technology of Fault Analysis

1.      Review of Day 1

2.      Introduction into High-impedance faults

3.      Equipment faults looking at external & internal causes

4.      Symmetrical faults and their components

5.      Unsymmetrical faults and their components

6.      How symmetrical and asymmetrical faults affect the network

·         The Effects on the Electrical Supply

  1. Volt-drop in an AC network system:- Impedance
  2. Looking at resistive, capacitive and inductive components in a network
  3. The effects of impedance on the protective devices in a network
  4. Earthing/ grounding systems in an electrical network, Transmission and Distribution.
  5. How earthing/grounding affects short circuit levels and protective devices
  6. Looking at voltage deviations in an electrical network
  7. The smart meter

Abnormal Condition on the Electrical Network

1.       Power outages

2.       Types of power outages (Brown out)

3.       Protecting networks from outages

4.       Solar flares

5.       Blackout inevitability and electric sustainability

6.       Transmission failure protection

7.       Modern Electrical network protection and issues

8.     Single line drawings

Distribution Management Systems

1.       Network Connectivity  Analysis

2.       Switching schedule and safety Management

3.       State estimation

4.       Load flow applications

5.       Volt – VAR control (VVC)

6.       Load shedding application

7.       Fault Management & System Restoration (FMSR)

8.       Load balancing via feeder recognition (LBFR)

9.       Distribution Load Forecasting

10.    IEC 61968 Standards based Integration

11.  Case Study

COURSE METHOD

COURSE SPEAKER

v  Presentation

v  Discuss

v  Case Study

v  Evaluation

v  Simulation

Ir Bambang Sugiyantoro, MT

Experied in Electrical

TIME & VENUE

COURSE FEE

Hotel Dafam Fortuna

Malioboro Yogyakarta

 

9 – 12 Juni 2014

11- 14 Agustus 2014

22- 25 September 2014

10 – 13 Desember  2014

 

4 days

08 am – 04 pm

In House Training:

Depend on request

IDR 7.000.000,- Per Participant non residential

 

Course fees can be transferred to the following account number :

CV JP CONSULTANT : MANDIRI Bank Yogyakarta Branch Acc. No.  1370007857077

 

FACILITY

INFORMATION AND REGISTRATION

¨  Module / Handout

¨  Certificate

¨  Souvenir

¨  Training Kit

¨  USB

JP Consultant

Kalibayem No. 436 Ngestiharjo Kasihan Bantul Yogyakarta

Phone        :  02743326339

Email         :  jpconsultantyogyakarta@gmail.com

Website     : www. jptrainingcenter.com          

Contact      : Tina (085741853818)

                             (082225972336)

Training Running 2018






Public Training 2015

PELATIHAN DAN PRAKTEK MOTOR AND MOTOR CONTROLS

???????????????????????????????

PELATIHAN CORROSION CONTROL OIL GAS EXPLORATION INDUSTRY

Steel Pipelines

Pelatihan Electrical

Project Management

PELATIHAN COMMUNICATION SKILL

Teknik Mengelola Krisis Publik dan Menghadapi Tekanan Media Massa

Training JP Consultant 1

PELATIHAN CHARACTER BUILDING

IMG_4364

Inhouse Training 2015

PELATIHAN TROUBLESHOOTING RELAY PROTECTION

PJB

INHOUSE TRAINING BASIC DRILLING

Cepu 1

Cepu