Get Adobe Flash player

Categori

Training running 2018

News

Page 32 of 47« First...1020...3031323334...40...Last »

Offering Training

 

Power System Protection and Relay Coordination

 

DESCRIPTION

The training in the principles and methods used to perform protective device coordination studies for low voltage through distribution level power systems with or without software. This is one of the few courses that is not merely a software training course. Specifically designed for industrial and government engineers that want knowledge of the principles of protective device coordination but also practical knowledge of how to achieve reasonable and economical device coordination.

The only course which can cover both national codes and standards and government criteria that affect coordination philosophies. Covers concepts, procedures, and guidance not covered in other courses in the industry. Examples will include critical systems fed from emergency generators and uninterruptible power supplies (UPS).

WHO SHOULD ATTEND

Utility engineers, consultants (especially those involved with IPP/DG design), equipment/control engineers, generator packager and manufacturer engineers as well as others who specify protective relays and develop settings for these devices.

SUMMARY OUTLINE

1.         System Analysis

  1. Fault Current and Load Flow Calculations Using Computer Software
  2. Remote Effects Of Faults
  3. Hand calculation method discussion

2.         Protective Device Coordination Principles

  1. Graphical Tools and Time/Current Curve Interpretation
  2. Load Flow and Unbalanced Fault Effects
  3. Cold Load Pickup
  4. Grounding System Constraints
  5. Coordination Economics
  6. Asymmetrical Current Impacts
  7. Coordination Time Intervals of Relays
  8. Transformer Effects on Coordination

3.         Equipment and Device Characteristics

  1. Fuses –including current limiting fuses
  2. Molded case and Insulated Case Breakers
  3. Solid-State Trip Low Voltage Breakers
  4. Equipment Damage Characteristics
  5. Proper Protective Device Selection
  6. Circuit Breaker Ratings and Selection
  7. Low Voltage Cable Protection
  8. Shielded Cable Protection
  9. Overhead Conductor Protection
  10. Motor Protection
  11. Generator Protection
  12. Transformer Protection
  13. Panelboard and Switchgear Protection
  14. Inverse Time/Overcurrent Protective Relays and
  15. Instantaneous Trip Devices
  16. Series Rated Breakers
  17. Differential and Voltage Constrained Relays
  18. Reclosing relays, reclosers, and sectionalizers
  19. Current transformer characteristics and selection

4.         Ground Fault Protection

  1. Arcing Ground Fault Magnitudes
  2. Ground Fault Protection Schemes
  3. Interaction Of Ground Fault Relays And Phase
  4. Overcurrent Devices

5.         Emergency Power System Design

  1. Weak Source Systems
  2. Generator Fault Characteristics
  3. Uninterruptible Power Supply Fault Characteristics
  4. Transfer and Static Switch Limitations
  5. Improving Emergency Circuit Design

6.         Common Coordination Problems, Errors, And Misconceptions

7.         Preliminary System One-line Development for a Coordinated System

Lessons Learned and “ Rules of Thumb” to spot uncoordinated systems and methods to develop a coordinated system design

8.         Criteria Impacting Coordination

  1. NESC, IEEE Std C2,
  2. NFPA 70-National Electrical Code
  3. Arc Flash Protection of Employees

9.         Switchgear And Relay Commissioning Including Optional Hands-On Student Calibration of a Relay

COURSE METHOD

COURSE SPEAKER

  1. Presentation
  2. Discuss
  3. Case Study
  4. Evaluation
  5. Simulation

Teguh Santoso, Ir

 

Teguh Santoso experienced more than 27 years in Electrical.

TIME & VENUE

COURSE FEE

Hotel Jentra  Jl. Dagen 85 Malioboro Yogyakarta

Telp (0274580789)

 

10 – 1 3  September 2013

 

4 days

 

08 am – 04 pm

 

IDR 7,000,000.00 per participant non residential

Course fees can be transferred to the following account number :

CV JP CONSULTANT : MANDIRI Bank Yogyakarta

 

Branch Acc. No.  1370007857077

 

FACILITY

INFORMATION AND REGISTRATION

  • Module / Handout
  • Certificate
  • Souvenir
  • Training Kit

JP Consultant

Kalibayem No. 436 Ngestiharjo Kasihan Bantul Yogyakarta

Phone        :  02743326339

Email         :  jpconsultantyogyakarta@gmail.com

Website       :  www.jptrainingcenter.com

Contact      : Tina (085741853818

                     Sari (08122758271)

                     Damiri (081944111699)

                   

Offering Training

COMPENSATION MANAGEMENT

DESCRIPTION

Pelatihan ini untuk membekali para peserta agar dapat mengevaluasi struktur kompensasi karyawan selama ini dan menyusun skema kompensasi yang terus menyesuaikan dengan dinamika organisasi, sehingga asas keadilan dan kebutuhan karyawan dapat dipenuhi.

WHO SHOULD ATTEND

Para staf dari departemen SDM secara umum dan staf yang bertugas pada sistem kompensasi karyawan.

OBJECTIVE

Materi ini untuk membekali para staf SDM yang berhubungan dengan kompensasi dan penggajian dengan pemahaman tentang perlunya terus memperhatikan dinamika karyawan dan organisasi dalam manajemen kompensasi perusahaan, agar asas keadilan dan merit system dapat terpenuhi dalam kegiatan organisasi.

SUMMARY OUTLINE

  1. Kompensasi dalam perspektif manajemen SDM
  2. Analisis Dinamika Perubahan Lingkungan Organisasi
  3. Sistem Kompensasi yang ada di Indonesia
  4. Jenis-jenis Kompensasi & Benefit, serta  Manajemen Kompensasi
  5. Komunikasi dengan Karyawan dalam Persoalan Kompensasi
  6. Negosiasi dan Penanganan Konflik yang Terkait dengan Kompensasi

COURSE METHOD

COURSE SPEAKER

  1. Presentation
  2. Discuss
  3. Case Study
  4. Evaluation
  5. Simulation

Dr. Singgih, MM

As a trainer in training employees on a variety of companies (such as Pertamina, Chevron, Peruri, Medco) in the field of marketing research, customer satisfaction, customer relationship management, independence to meet the purnabakti, analysis of financial statements, logistics management etc.

TIME & VENUE

COURSE FEE

Hotel Jentra  Jl. Dagen 85 Malioboro Yogyakarta

Telp (0274580789)

17-19 June 2013

3 days

08 am – 04 pm

In House Training:

Depend on request

IDR 5.800.000,- Per Participant non residential

 

Course fees can be transferred to the following account number :

CV JP CONSULTANT : MANDIRI Bank Yogyakarta Branch Acc. No.  1370007857077

 

FACILITY

INFORMATION AND REGISTRATION

  • Module / Handout
  • Certificate
  • Souvenir
  • Training Kit

JP Consultant

Kalibayem No. 436 Ngestiharjo Kasihan Bantul Yogyakarta

Phone        :  02743326339

Email         :  jpconsultantyogyakarta@gmail.com

Web           :  www.jptrainingcenter.com

Contact      : Tina (085741853818)

                    Sari (08122758271)

                    Damiri (08944111699)

Page 32 of 47« First...1020...3031323334...40...Last »

Public Training 2018

Pelaksanaan Pelatihan 2018

PELATIHAN PTPN III MEDAN

Collage 2017-09-25 13_13_48

PDAM SURABAYA

Collage 2017-10-13 18_29_47

PDAM SUARABAYA

Collage 2017-10-29 15_39_58

MUNCUL GROUP YOGYAKARTA

Collage 2017-11-07 06_47_04

PDAM SURABAYA

Collage 2017-11-11 19_33_21

SMK3 PERTAMBANGAN BENGKALIS

 

 

 

PELATIHAN DAN PRAKTEK MOTOR AND MOTOR CONTROLS

???????????????????????????????

PELATIHAN CORROSION CONTROL OIL GAS EXPLORATION INDUSTRY

Steel Pipelines

Pelatihan Electrical

Project Management

PELATIHAN COMMUNICATION SKILL

Teknik Mengelola Krisis Publik dan Menghadapi Tekanan Media Massa

Training JP Consultant 1

PELATIHAN CHARACTER BUILDING

IMG_4364

Inhouse Training 2015

PELATIHAN TROUBLESHOOTING RELAY PROTECTION

PJB

INHOUSE TRAINING BASIC DRILLING

Cepu 1

Cepu